樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/樂泰 770平板電腦/筆記本ipad專用膠水，樂泰膠水/
技術服務熱線：021-51693135 / 021-22818476
樂泰® 770™ is used to make polyolefin and other low energy surfaces suitable for bonding with 樂泰 cyanoacrylate adhesives. On such treated surfaces the cured performance of 樂泰® cyanoacrylate adhesives is generally similar to that described in the TDS for the relevant adhesive. It is only recommended for difficult to bond substrates which include polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials. 樂泰® 770™ Polyolefin Primer is not recommended in assemblies where high peel strength is required. TYPICAL PROPERTIES Specific Gravity @ 25 °C 0.68 Viscosity @ 20 °C, mPa•s (cP) 1.25 Drying Time @ 20 °C, seconds ≤30 On Part Life, hours ≤8 Flash Point - See MSDS TYPICAL PERFORMANCE Fixture time and cure speed achieved as a result of using 樂泰® 770™ depend on the adhesive used and the substrate bonded. Effect on Cure Speed of Cyanoacrylate Adhesives 樂泰® 770™ also behaves as an activator and accelerates the cure speed of cyanoacrylate adhesives. Fixturing time on most primed substrates is less than 5 seconds but 24 hours at room temperature (22 °C) should be allowed for adhesive t |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。