高速公路護欄板設備——江陰博世杰
聯系人：湯靈珠 聯系電話：13906181752
成型工藝
放料架—整平機—沖孔機—快速送料—光電定尺—成型主機—校直裝置—收料架—控制系統—成型模具
一、技術參數
1、加工工件厚度： 3mm-4.0mm（材料：Q235）
2、型材高度：85mm
3、板材寬度*大：480mm
注：具體型材尺寸及要求按客戶提供的圖紙要求
3、成型長度： 4米
4、總電機功率約：65.7KW
電壓：380V，50赫茲，3相，交流電
5、主機成型控制有操作手柄控制
6、機組尺寸：20000mmX2000mmX 2500mm
7、*大軋制型材高度85mm，
8、*大軋制厚度4.0mm，
9、*大軋制速度15m每分鐘。
10、焊接機座的結構用材必須符合要求，焊接要符合國家鋼結焊接標準的要求。
11、設備經除銹處理后，先涂鋼構專用防銹漆，防銹漆必須覆蓋全面，再涂優質面漆。轉動部分應用警示色區別。
Molding process
Feeding rack, leveling machine, punching machine, fast feeding, photoelectric length, forming the host, straightening device, rack, control system, forming die
A, technical parameters
1, the processing workpiece thickness: 3 mm to 4.0 mm (material: Q235)
2, profile height: 85 mm
3, plate width: 480 mm
Note: the specific profile size and demands according to the drawings provided by customers
3, forming length: 4 m
4, the total motor power: 65.7 KW
Voltage: 380 v, 50 hz, three phase alternating current
5, the host has operating handle shape control control
6, the unit size: 20000 mmx2000mmx 2500 mm
7, the maximum rolling profile height 85 mm,
8, the maximum rolling thickness of 4.0 mm,
9, the maximum speed of 15 m per minute.
10, the welding structure of the base material must conform to the requirements, welding to accord with the requirement of national steel and welding standard.
11, the equipment after derusting treatment, first TuGang structure is special antirust paint, antirust paint must cover comprehensive, high-quality paint besmear again. Turn the partial application warning color difference |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。