ANDEROL ®3057M
SYNTHETIC COMPRESSOR OIL, ISO 46/68
For more information please refer to the relevant
Material Safety Data Sheet accompanying each
product.
®ANDEROL is a reg. trademark of ANDEROL COMPANY.
This information is furnished without warranty, representation, inducement,
or license of any kind, except that it is accurate to the best of OUR
knowledge or obtained from sources believed by ANDEROL to be
accurate. ANDEROL does not assume any legal responsibility for use of
reliance upon it. Only chemists or chemically qualified lab technicians
should carry out tests. Before using any chemical, read its label and
Material Safety Data Sheet.
GENERAL INFORMATION
ANDEROL 3057M is a PAO-based compressor lubricant that was designed to provide long-term lubrication of both
rotary-vane and oil-flooded screw compressors.
TYPICAL PROPERTIES:
PROPERTY TEST METHOD TYPICAL
RESULTS
ISO Viscosity Grade
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity @ -25°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Pour Point, °C
Flash Point, COC, °C
Total Acid Number, mg KOH/g
Humidity, %
Evaporation, 22 hrs @ 210 °F, %
Demulsibility @ 54 °C, ml oil/water/emulsion (min)
Copper Strip Corrosion 8 hrs @ 100 °C
Four-Ball Wear, 1200 rpm, 75 °C, 40 kg, 1 hr, mm
Foaming Tendency, Sequence I, II, III
Specific Gravity @15.6°C
ASTM D-2422
ASTM - 445
ASTM - 445
ASTM D-445
ASTM D-2270
DIN 51.757
ASTM D-97
ASTM D-92
ASTM D-664
ASTM D-1744
ASTM D-972
ASTM D-1401
ASTM D-130
ASTM D-4172
ASTM D-892
ASTM D -1298
46/68
55.3
8.13
3672
116
0.864
-66
260
0.05
0.02
<1
40/38/2 (15)
1a
0.6
Nil
0.8 5
ANDEROL 3057M
APPLICATIONS
•Recommended for use in compressors such as:
•Oil flooded rotary screw compressors
•Oil flooded rotary vane compressors
•= |
 |
|
手機站
您當前位置是：產品大全 >> 精細化工 >>
工業潤滑油
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息
