質量好的光纜，信譽好的光纜廠，性價比高的光纜，深圳光纜廠，專業的光纜廠，有售后服務的光纜，用長飛纖芯的光纜，低煙無鹵光纜，礦用光纜，層絞式光纜，中心束管式光纜，非金屬光纜，鎧裝光纜，海底光纜，加強芯光纜，室內光纜，室外光纜，架空光纜，直埋光纜，防水光纜，皮線光纜，光纖入戶光纜，光電混合纜，光電復合纜，饋電光纜，光纜價格，光纜型號，光纜多少錢一米，光纜施工，光纜熔接，跳線纜，防鼠光纜，鋁帶鎧裝光纜，鋼帶鎧裝光纜，單模光纜，多模光纜。
·產品描述 Description
GYTA53光纜的結構是將250μm光纖套入高模量材料制成的松套管中，松套管內填充防水化合物。纜芯的中心是一根金屬加強芯，對于某些芯數的光纜來說，金屬加強芯外還需要擠上一層聚乙烯（PE）。松套管（和填充繩）圍繞中心加強芯絞合成緊湊和圓形的纜芯，纜芯內的縫隙充以阻水填充物。涂塑鋁帶（APL）縱包后擠一層聚乙烯內護套，雙面涂塑鋼帶（PSP）縱包后擠制聚乙烯護套成纜。
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.
·產品特點 Characteristics
·具有很好的機械性能和溫度特性
· Good mechanical and temperature performance
·松套管材料本身具有良好的耐水性能和較高的強度
· High strength looes tube that is hydrolysis resistant
·管內充以特種油膏，對光纖進行了關鍵性保護
· Special tube filling compound ensure a critical protection of fiber
·良好的抗壓性和柔軟性
· Crush resistance and flexibility
·采用下列措施來確保光纜的防水性能：
· The following measures are taken to ensure the cable watertight:
-單根鋼絲中心加強芯
- Steel wire used as the central strength member
-松套管內填充特種防水化合物
- Loose tube filling compound
-完全纜芯填充
- 100% cable core filling
-涂塑鋁帶（APL）防潮層
- APL moisture barrier
-雙面涂塑鋼帶（PSP）提高光纜的抗透潮能力
- PSP enhancing moisture-proof
-良好的阻水材料防止光纜縱向滲水
- Water-blocking material |
 |
|
手機站
您當前位置是：產品大全 >> 通訊產品 >>
通訊系統
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息