Product name 3D printing paste
State Paste
Packing 25KG/drum for white, 20KG/drum for clear
Storage 6 months in cool place
Application Suitable for cotton, polyester etc
Features 1. High elasticity
2. High fastness
3. SGS detecting passed, no PVC, no heavy metal, no NPEOs
Mix proportion Light: White printing paste 70-80% + Clear printing paste 20-30% + pigment ?%
Deep: White printing paste 20-30% + Clear printing paste 70-80% + pigment ?%
Printing process 1. Printing with clear printing paste for 2-3 times
2. Mixing with white printing paste, clear printing paste, pigment and stirring them evenly.
3. Printing again for 3-4 times (3-4 scrapes per time).
4. Drying it in room temperature, or baking for 1-3 minutes under 150-180℃
5. Finish.
Attentions
品名 水性厚板漿
外觀 糊狀
包裝 白膠漿25KG/桶，透明漿20KG/桶
貯存期 常溫下6個月
應用 針織布
賣點 1. 手感柔軟
2. 高牢度耐水洗
3. 符合美國ASTM對鄰苯二甲酸脂和歐盟EN71 Part 3對重金屬含量的要求
調配比例 印淺色：白膠漿70-80% + 透明漿20-30% + 色種？%
印深色：白膠漿20-30% + 透明漿70-80% + 色種？%
工藝流程 1. 絲網選用80-100目厚板，用絲印硬方刀75度刮印, 以透明漿打底2-3次
2. 將白膠漿，透明漿，色種攪拌勻印2-3次
3. 24-48小時自然干燥，或150-180度焙烘1-3分鐘 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
其他樹脂
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息