類型： 膜片壓力表 聯接型式： G1/2
型號： PGT43HP.100 PGT43HP.160 精度等級： 1.6
品牌： WIKA/威卡 環境溫度： -40-70（℃）
加工定制： 是 公稱直徑： 100 160（mm）
測量范圍： 0 ... 16 mbar to 0 ... 250 mbar（MPa）
WIKA PGT43HP.100 160
全鋼安全型帶過壓保護膜片式電接點壓力表
Diaphragm pressure gauge with electrical output signal
Stainless steel, safety version
High overpressure safety up to 400 bar
Models PGT43HP.100 and PGT43HP.160
Diaphragm pressure gauge model PGT43HP.100
Applications
Acquisition and display of process values
Transmission of process values to the control room, 4 ... 20 mA, 0 ... 20 mA, 0 ... 10 V
For measuring points with increased overpressure of 40, 100 or 400 bar
Easy-to-read, analogue on-site display needing no external power
Safety-related applications
Special features
"Plug-and-play" with no configuration necessary
Measuring ranges from 0 ... 16 mbar
Wide choice of special materials
For gaseous, liquid and aggressive media, also in aggressive ambience, due to all stainless steel construction
Safety pressure gauge S3 per EN 837
Description
At any point where the process pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the model PGT43HP intelliGAUGE (US Patent No. 8,030,990) can be used.
Due to the metallic construction of the pressure elements, these instruments have a high overpressure safety in the ranges of 40, 100 and 400 bar.
Through the combination of a high-quality mechanical measuring system and precise electronic signal processing, the process pressure can be read securely, even if the power supply is lost. The intelliGAUGE model PGT43HP fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the operating pressure of pressure vessels. An additional measuring point for mechanical pressure indication can thus be saved.
The model PGT43HP is based upon a model 432.36 highquality, stainless steel safety pressure gauge with a nominalsize of 100 or 160. The pressure gauge is manufactured in accordance with EN 837-3.
The rugged design of the diaphragm measuring systemproduces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft - it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, e.g. 4 ... 20 mA, is produced.
The electronic WIKA transmitter, integrated into the high-quality mechanical pressure gauge, combines the advantages of electrical signal transmission with the
advantages of a local mechanical display.
The measuring span (electrical output signal) is set automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 ... 20 mA. The electrical zero point can also be set manually.
Standard version
Nominal size in mm
100, 160
Accuracy class
1.6
Scale range
0 ... 16 mbar to 0 ... 250 mbar
0 ... 400 mbar to 0 ... 40 bar or all other equivalent vacuum or combined pressure and vacuum ranges
Overpressure safety
40, 100 or 400 bar
Process connection with lower measuring flange
Stainless steel 316L, G ½ B (male), 22 mm flats
歡迎致電咨詢訂購WIKA PGT43HP.100 160 全鋼安全型帶過壓保護膜片式電接點壓力表
電話:010-51669912 56291930 15910733293
傳真：010-51669912
QQ：823377546 1491421115 2636968574
郵箱：sales@zoriver.cn
公司官網：http://www.zoriver.cn http://www.zoriver.com.cn |
 |
|
手機站
您當前位置是：產品大全 >> 儀器儀表 >>
壓力儀表
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息