路博潤ESTANE S168D TPU
Type: ESTANE? S168D is a Shore 68D, polyester grade thermoplastic polyurethane (TPU). Uses: Injection Molding Physical Properties Standard No. Units Value Hardness ASTM D2240 Shore D 68 Specific Gravity ASTM D792 g/cm3 1.27 Mechanical Tensile Stress: ASTM D412 kgf/cm2 At *** elongation 280 At 300% elongation 400 Tensile Strength ASTM D412 kgf/cm2 450 Ultimate Elongation ASTM D412 % 430 Tear Resistance (Die C) ASTM D624 kgf/cm 250 Abrasion Loss ISO 4649 mm3 loss 25 Compression Set ASTM D395 At 23°C X22hr % 20 At 70°C X22hr % 45 Mold Shrinkage ASTM D955 m/m 0.006 Thermal Vicat Softening Temperature ASTM D1525 °C 163 *Test samples were annealed at 100oC and 24 hours at room temperature before testing. **These are typical values and should not be used for specifications. Injection Molding Guide These settings are to be used only as a guide. This is a typical injection molding |
|
手機站
您當前位置是：產品大全 >> 橡膠塑料 >>
塑料原料
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。
聯系信息
