樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103
樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103
樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103 樂泰3103
技術服務熱線：021-51693135 / 021-22818476
PRODUCT DESCRIPTION
樂泰®
3103™ provides the following product
characteristics:
Technology Acrylic
Chemical Type Acrylated urethane
Appearance (uncured) Transparent to slightly hazy liquidLMS
Components One component - requires no mixing
Viscosity Medium, thixotropic
Cure Ultraviolet (UV)/ visible light
Cure Benefit Production - high speed curing
Application Bonding
Flexibility Enhances load bearing & shock
absorbing characteristics of the bond
area.
樂泰®
3103™ is primarily designed for bonding
polycarbonate to itself, while not inducing stress cracking under
typical molded stress levels. 樂泰®
3103™ cures rapidly
to form flexible, transparent bonds when exposed to ultraviolet
light and/or visible light of sufficient irradiance and has shown
excellent adhesion to a wide variety of substrates
including glass, many plastics and most metals. The thixotropic
nature of 樂泰®
3103™ reduces the migration of liquid
product after application to the substrate.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.13
Refractive Index 1.48
Flash Point - See MSDS
Viscosity, Brookfield - RVT, 25 °C, mPa·s (cP):
Spindle 5, speed 20 rpm 8,000 to 14,500LMS
TYPICAL CURING PERFORMANCE
樂泰®
3103™ can be cured by exposure to UV and/or
visible light of sufficient intensity. To obtain full cure on
surfaces exposed to air, radiation @ 220 to 260 nm is also
required. The speed of cure will depend upon the UV intensity
and spectral distribution of the light source, the exposure time
and the light transmittance of the substrates.
樂泰 3103 is primarily designed for |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
