產品描述：
GYTA/GYTS 光纜的結構是將單模或多模光纖套入由高模量的聚酯材料做成的松套管中，套管內填充防水化合物。纜芯的中心是一根金屬加強芯，對于某些芯數的光纜來說，金屬加強芯外還需擠上一層聚乙烯 (PE) 。松套管 ( 和填充繩 ) 圍繞中心加強芯絞合成緊湊的圓形纜芯，纜芯內的縫隙充以阻水填充物。涂塑鋁帶 (APL) 縱包后擠制聚乙烯護套成纜。
GYTA/GYTS cable structure is the single mode or multimode fiber into the loose tube made of high modulus polyes-ter material, the casing filled with waterproof compound. The core of the cable core is a metal core, for some of thecore number of optical cable, the metal to strengthen the core need to squeeze a layer of polyethylene (PE). Loosetube (and filled rope) around the center to strengthen the core of the core to strengthen the synthesis of compact circular core cable, the core of the gap filled with water to fill the water filled. Coated aluminium (APL) longitudinalpackage with a PE sheath cable.
產品特點：
精確控制的光纖余長保證了光纜具有良好的抗拉性能和溫度特性套管材料本身具有良好的耐水解性能和較高的強度，管內充以特種油膏對光纖提供了關鍵性保護聚乙嫌 (PE )護套具有良好的抗紫外輻射性能采用下列措施來確保光纜的防水性能：單根鋼絲中心加強芯;松套管內填充特種防水化合物 ; 完全纜芯填充 , 涂塑鋁帶 (APL) 防潮層。
Precise control of fiber excess length to ensure the cable has good tensile properties and temperature characteristics of the casing material itself has good resistance to hydrolysis performance and high strength, tube filled with special cream of fiber provides key protective polyethylene (PE) sheathed with a good performance of anti ultraviolet radiation of the following measures are taken to ensure the cable waterproof performance: A single wire center strengthening core. Special waterproof compound filled with loose tube. Full cable core filling. Coated aluminium (APL) moistureproof layer |
 |
|
手機站
您當前位置是：產品大全 >> 電工電氣 >>
廣電、電信設備
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息
