一、磨盤鉆機機用柴油機作動力，有電力地區也可改用電動機驅動。
二、本鉆機為散裝式轉盤鉆機，主要是用于第四紀中、細顆粒地層及一般軟巖石層。
主要用途有：
1、勘探和普查底層的水文地質情況；
2、為農業灌溉、工業用水鉆鑿水井；
3、地下坑道通風、橋梁等工程鉆孔。
三、鉆機工作時用泥漿沖洗液（正循環），轉盤回轉帶動鉆具轉動。用卷揚系統實現減壓鉆進、升降鉆具、下井管、沖擊取樣、立放鉆塔等。
四、鉆機設有微調鉆進機構和機械擰卸鉆具裝置。
A drill machine with diesel engine as power, a millstone, also can convert motor drive power for the region.
Second, the rotary drill rig for bulk type, mainly used in the quaternary, fine particles generally soft rock strata.
Main purposes:
1, the exploration and survey at the bottom of the hydrogeological condition;
2, for agricultural irrigation, industrial diamond drilling Wells;
3, underground tunnel ventilation, Bridges and other engineering drilling.
Three, drilling rig mud rinses at work (positive), wheel rotation driven in drilling tools.With winding system implementation under reduced pressure drilling, lift tool, tube well, impact sampling, standing rig, etc.
Four, drilling rig has fine drilling mechanism and mechanical twist drill unloader.
項目 Project SPJ-300 SPJ-400 SPJ600
鉆孔直徑 Borehole diameter Φ500mm-1500mm Φ500mm-1800mm 500mm-2500mm
鉆孔深度 Drilling depth 300m、50m 400m、50m 600m
*大輸出扭矩Maximum output torque 18KN/m 18KN/m  
主動鉆桿 Active drill rod 08mm×108mm×4000mm 108mm×108mm×4000mm 108x108x8000   108x108x12000
鉆桿 Drill pipe φ89mm×4200mm，φ127×φ108×4200mm φ89mm×4200mm，φ127×φ108×4200mm  
主卷揚提升能力 The main hoist capacity 30KN 30KN 35
副卷揚提升能力Auxiliary hoist capacity 20KN 20KN 15
轉盤通孔直徑 Rotary table diameter 500mm-1000mm 500mm-1200mm φ605
轉盤轉速(正、反)Rotary speed (positive and negative) 40、70、128r/min 40、70、128r/min 42, 75, 134 r/min
鉆塔垂直高度 The vertical height of tower 8.6m 8.6m  
鉆機重量 Rig weight 6.5t 6.5t  
外型尺寸Dimen |
 |
|
手機站
您當前位置是：產品大全 >> 機械及行業設備 >>
工程與建筑機械
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息