龍崗平板電腦激光打標機 龍崗氧化鋁激光鐳雕機
服務熱線 ： 136-3168-0597 吳生
激光鐳雕機產品特點 Laser engraving machine product features
1.采用高穩定光纖激光器，平均壽命10萬小時
1., a high stability fiber laser with an average life span of 100 thousand hours
2.可標記文字、矢量圖形、二維碼條碼、圖片等固定和變化的文本
2. can mark text, vector graphics, two-dimensional code, bar code, pictures and other fixed and change the text
3.打標效果豐富、細膩，速度快，易于集成到流水線
3. marking effect is rich, delicate, fast, easy to integrate into the assembly line
4.設備長期運行穩定，免維護，滿足工業24小時連續工作要求
4., equipment long-term operation stability, maintenance free, to meet the industry 24 hours continuous work requirements
5.適用于金屬和非金屬的精細標記，性價比高
5. 、 suitable for metal and nonmetal fine marking, high performance price ratio
6.針對特定的要求，可定制夾具和軟件
6. custom fixtures and software can be customized for specific requirements
激光鐳雕機技術參數
Technical parameters of laser beam carving machine
產品型號:YLP- 20w
Item number: YLP- 20W
平均輸出功率:20W
Average output power: 20W
激光波長:1064nm
Laser wavelength: 1064nm
功率調節范圍:0-100%
Range of power regulation: 0-100%
重復頻率:20-80KHz
Repetition frequency: 20-80KHz
輸出光束質量:M2<1.5
Output beam quality: M2<1.5
標刻線深:≤0.2mm
Deep lines: less than 0.2mm
最聚焦光斑:0.005mm
The most focused spot: 0.005mm
最字符高度:0.15mm
Maximum character height: 0.15mm
重復精度:±0.001mm
Repeatability accuracy: + 0.001mm
最直線打標速度:12000mm/s
The most linear marking speed: 12000mm/s
標準雕刻范圍:100mm×100mm
Standard engraving range: 100mm * 100mm
選配雕刻范圍:50mm×50mm150mm×150mm
Optional engraving range: 50mm * 50mm150mm * 150mm
控制接口:USB
Control interface: USB
激光模塊壽命:>100000小時
Laser module life: >100000 hours
振鏡:高性能掃描振鏡
Vibrating mirror: high performance scanning galvanometer
整機功耗:<0.5KW
Power consumption of the whole machine: < |
 |
|
手機站
您當前位置是：產品大全 >> 機械及行業設備 >>
工藝品加工設備
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息