在線式選擇性波峰焊 型號 SUNFLOW3
機體參數
General technical data
*大PCB 板尺寸/Max PCB size (mm) 510(L)x450(W)
*小PCB 板尺寸/Min PCB size (mm) 120(L)x50(W)
PCB 頂部間隙/PCB top side clearance (mm) 120
PCB 底部間隙/PCB bottom side clearance (mm) 30
PCB 工藝邊/PCB technics side (mm) ≥3
傳送帶距離地面高度/Conveyor height from floor (mm) 850±25
PCB 傳送速度/PCB conveyor speed (m/min) 0-12
PCB 重量/Max PCB weight (kg) ≤5
PCB 厚度(包含治具)/PCB thickness (including fixture) (mm) 1-6
傳送帶可調范圍/Conveyor width adjustment (mm) 50-450
傳送帶調寬方式/Conveyor width adjustment mode 電動/Electromotion
傳送帶可調寬精度/Conveyor width adjusted accuracy (mm) ±0.1
PCB 傳送方向/PCB Conveyor direction 左向右/Left to right
壓縮空氣所需壓力/Compressed air required pressure (Mpa) 0.5-0.8
電源電壓/Main voltage(VAC) 380
電壓容差/Voltage tolerance range (%) 6-10
頻率/Frequency (HZ) 50/60
*大功耗/Max power consumption (kw) <25
*大電流/Max amperage (A) <34
環境溫度/Ambient temperature (℃) 10-35
機器噪音/Permanent sound level (dB) <65
通訊接口/Communication interface SMEMA
設備外形尺寸/Overall dimensions(mm) 3010(L)*1620(W)*1700(H)
設備重量/Equipment weight(kg) 2000
焊接系統
Soldering module
焊接噴嘴/Solder nozzle 高精度單噴嘴/High precision single nozzle
*小噴嘴外徑/Smallest nozzle outer diameter (mm) 5.5
噴嘴內徑/Nozzle inner diameter (mm) 2.5-10
*大波峰高度/Max solder wave height (mm) 5
錫爐容量/Solder volume (kg) 5
*大焊接溫度/Max solder temperature (℃) 350±2
錫爐加熱功率/Soldering heating power (kw) 1.3
氮氣供應/Nitrogen supply 由客戶提供/Offered by customer
氮氣所需壓力/Nitrogen required pressure (Mpa) 0.3
氮氣消耗量/Nitrogen consumption (m3/h) 1.2
所需氮氣純度/Required particle cleanliness (%) ﹥99.99
預熱系統
Preheating module
預熱溫度范圍/Preheat temperature range (℃) 0-200
預熱控溫精度/Preheat control accuracy (℃) ±2
加熱功率/Preheating medium (kw) 21
PCB 溫度均勻性/PCB temperature uniformity (℃) 5
加熱方式/Preheating medium 熱風+紅外/Hot air+Infrared
頂部預熱/To |
 |
|
手機站
您當前位置是：產品大全 >> 機械及行業設備 >>
電子產品設備
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息