三通換向閥Diverter Valve
產品介紹 Product introduction
三通換向器俗稱三通換向閥，分向閥，是應用于固體物料（粉沫、顆粒物料、粉粒混合物、片狀等）輸送系統中用于切換管道中物料流向的專用設備，完全密封的結構可適用于室外環境。
Diverter valve is commonly called as 3-way direction change valves and bypass valves. It, fully closed structure, is applicable for outdoor condition, used in the conveying system for solid materials (powder, particles, powder/particle mixtures, flakes and etc. ) when switching over the materials in the piping to special equipment.
產品特點Product Features：
★ 殼體和主要零件均采用緊密鑄造，構造堅固，高強度不易變形，外形美觀；
The shell and its main attachments are precision cast with good-looking appearance .
★ 輸送通道平滑光潔，確保物料流通順暢，不會形成堵塞；
The channel is smoothly and ensure that material go through freely, not be clogged up.
★ 根據物料特性和輸送工況條件有多種結構形式：旋轉板式、筒式；
According to the material properties and transportation conditions have various forms of rotating plate structure, cylinder.
★ 用戶可根據輸送管路的需求，可以自主選擇合適的安裝角度；
The client can, as per the need of conveying route, freely select the suitable installation angle and direction
★ 在有壓力密封的要求場合，可以配置特殊的密封結構，完全滿足使用要求。
Under the pressure and seal conditions,special seal structure can be equipped to fully satisfy with the application requirements.
★ 拋光精度可達400#，可達食品級、藥品級要求；
The buffing can be 400#,apply to convey food or medicine.
★ 可根據客戶要求選擇多種材質：不銹鋼（SS304、SS304L、SS316、SS316L），碳鋼等；
Many kinds of material such as SS304、SS304L、SS316、SS316L,WCB to meet different requirement.
★ 完善的自動化控制系統，保證高效的運行可靠性。
The control system may raise the automated level, ensur the high efficiency operation .
主要參數 Main Parameters :
工作壓力 Working Pressure 常壓/低壓 ATM/LP 中壓MP 高壓 HP
ATM<0.1Mp |
 |
|
手機站
您當前位置是：產品大全 >> 機械及行業設備 >>
閥門
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息