MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/MACROMELT MM6208電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
Properties:
MACROMELT® 6208 is a thermoplastic hot melt adhesive based on polyamide. This product has good
adhesion to a wide range of difficult to bond substrates such as plastic and metals. MACROMELT® 6208 is
manufactured from ingredients regulated under the FDA Code of Federal Regulations 175.105 (adhesives)
and is recognized by Underwriter's Laboratories as having a flammability rating of 94-V-0 for adhesives. This
product is supplied in round bead form.
Handling and Application:
MACROMELT® 6208 resin will pick up moisture from the air. This will not be obvious in the solid form, but
could cause foaming as it is melted. Foaming could cause poor bonds. Close the container tightly as soon as
sufficient product has been removed for immediate use.
Storage Conditions:
When properly stored in a cool, dry location, with the container tightly closed when not in use, this product will
have a shelf life of at least one year.
屬性：
MACROMELT®6208是一種基于聚酰胺的熱塑性熱熔膠。這個產品好
粘附到各種難以粘合的基材如塑料和金屬。 MACROMELT®6208是
由聯邦法規175.105（粘合劑）FDA規定的成分制成
并被包銷商實驗室認可為粘合劑的94-V-0的可燃性等級。這個
產品以圓珠形式供應。
處理與應用：
MACROMELT®6208樹脂將從空氣中吸收水分。這在固體形式上并不明顯，但是
在熔化時會引起起泡。發泡可能導致債券不良。盡快關閉容器
足夠的產品已被刪除以便立即使用。
儲存條件：
妥善儲存在陰涼，干燥的地方，容器在不使用時密閉，本產品將會
保質期至少一年。 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
