樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/樂泰 3851電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
樂泰®
3851™ typical applications include bonding glass to
metal for structural or decorative purposes, particularly where
some parts of the bondline are shaded from UV light.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.1
Flash Point - See SDS
Viscosity, Brookfield - RVT, 25 °C, mPa•s (cP):
Spindle 4, speed 20 rpm, 3,000 to 7,000LMS
TYPICAL CURING PERFORMANCE
This product is cured when exposed to UV radiation of 365nm.
To obtain a full cure on surfaces exposed to air, radiation at
250nm is also required. The speed of cure will depend on the
UV intensity as measured at the product surface.
Fixture Time
Fixture time is defined as the time to develop a shear strength
of 0.1 N/mm2.
UV Fixture Time, Glass, seconds:
Medium Pressure Hg Arc bulb, Zeta®
7200 light source:
10 mW/cm2, measured @ 365 nm 9
100 mW/cm2, measured @ 365 nm 6
Fixture Time, ISO 4587, seconds:
Steel (grit blasted), with Activator 7649™ on 2 sides ≤25LMS
Storage
Store product in the unopened container in a dry location. Storage
information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater
than 28 °C can adversely affect product properties
樂泰®
3851™典型應用包括粘合玻璃
用于結構或裝飾用途的金屬，特別是在哪里
粘合線的一些部分被紫外線遮蔽。
固 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
