樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/樂泰 3106電子組裝/工業(yè)膠水/電子組裝膠水/工業(yè)用膠
技術服務熱線：021-51693135 / 021-22818476
樂泰®3106™ is primarily designed for bonding rigid or
flexible PVC to polycarbonate where large gap filling
capabilities and flexible joints are desired. The product has
shown excellent adhesion to a wide variety of substrates
including glass, many plastics and most metals. The thixotropic
nature of 樂泰®
3106™ reduces the migration of liquid
product after application to the substrate.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.08
Refractive Index 1.48
Flash Point - See MSDS
Viscosity, Brookfield - RVT, 25 °C, mPa•s (cP):
Spindle 4, speed 20 rpm 3,500 to 7,500LMS
TYPICAL CURING PERFORMANCE
樂泰®
3106™ can be cured by exposure to UV and/or
visible light of sufficient intensity. To obtain full cure on
surfaces exposed to air, radiation @ 220 to 260 nm is also
required. The speed of cure will depend upon the UV intensity
and spectral distribution of the light source, the exposure time
and the light transmittance of the substrates.
Stress Cracking
Liquid adhesive is applied to a polycarbonate bar 6.4 cm by
13 mm by 3 mm which is then flexed to induce a known stress
level.
Stress Cracking, ASTM D 3929, minutes:
7 N/mm2 stress on bar >15
12 N/mm2 stress on bar 13 to 14 Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
樂泰®
3106™主要設計用于粘結剛性或
柔性PVC到聚碳酸酯，大間隙填充
能力和柔性接頭是 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發(fā)布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯(lián)系信息
