樂泰 3705電子組裝/樂泰 3705電子組裝/樂泰 3705電子組裝/樂泰 3705電子組裝/樂泰 3705電子組裝/樂泰 3705電子組裝/樂泰 3705電子組裝/樂泰 3705電子組裝/樂泰 3705電子組裝/樂泰 3705電子組裝/樂泰 3705電子組裝/樂泰 3705電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
3705 UV cure adhesive is designed for high throughput
assembly operations. Its thixotropic nature reduces migration
of the liquid product after application to the substrate.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, Brookfield - HBT, 25 °C, mPa•s (cP):
Spindle TB, Helipath, speed 10 rpm 44,000
Specific Gravity @ 25 °C 1.1
Flash Point - See MSDS
TYPICAL CURING PERFORMANCE
Recommended UV Cure
Light Source and Condition:
Zeta 7411 UV Flood System
Light Intensity, mW/cm2 30
UV Wavelength, nm 365
Time, seconds 80
3705 can be cured by exposure to UV and/or visible light of sufficient
intensity. Cure rate and ultimate depth of cure depend on light
intensity, spectral distribution of light source, exposure time, etc.
Fixture Time
UV fixture time is defined as the light exposure time required to
develop a shear strength of 0.1 N/mm2.
UV Fixture Time , Glass microscope slides, 0 gap, seconds:
6 mW/cm2, measured @ 365 nm ≤10 Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 to 28°C. Storage below 8°C or greater
than 28°C can adversely affect product properties.
3705紫外線固化粘合劑設計用于高通量
裝配作業。其觸變性降低遷移
的液體產品。
固化材料的典型特性
粘度，Brookfield-HBT，25℃，mPa•s（cP）：
主軸TB，Helipath，轉速10 rpm，44,000
25°C比重1.1
閃點 - 參見MSDS
典型的固化性能
推薦UV固化
光源及條件：
Zeta 7411紫外線防洪系統
光強度，mW /cm230
UV波長，nm 365
時間，秒80
3705可以通過暴露于足夠的UV和/或可見光來固化
強度。治愈率和*極治療深度取決于光
強度，光源光譜分布，曝光時間等
夾具時間
UV固定時間定義為所需 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
