ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/ECCOSEAL 7200電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
ECCOSEAL 7200 adhesive sealant is designed for high
throughput display assembly for displays that require
protection against humidity and oxygen.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity at 25°C, mPa•s (cP)
(Plate 2 cm at 1.5 s
-1 )
2,000 to
2,700
Flow Rate @ 25°C, seconds:
10 mm distance between Glass and PET
at 250μm thick
<250
Particle Size, μm, maximum 120
Particle Size, μm, typical 50 to 60
Pot Life @ 25oC, hours 12
Shelf Life @ -40°C, months 6
Flash Point - See MSDS
TYPICAL CURING PERFORMANCE
Cure Schedule
Convection:
30 minutes @ 70°C or
15 minutes @ 80°C or
7 minutes @ 100°C
Time shown does not include ramp-up time to cure temperaure.
After cure, the material is best left at room temperature for 24 hoursbefore starting any evaluation
The above cure profiles are guideline recommendations. Cureconditions (time and temperature) may vary based oncustomers' experience and their application requirements, aswell as customer curing equipment, oven loading and actualoven temperatures. Storage Store product in the unopened container in a dry location.Storage information may be indicated on the product containerlabeling.Optimal Storage: -40 °C
ECCOSEAL 7200膠粘劑專為高要求的顯示器的吞吐量顯示組件防止潮濕和氧氣。
固化材料的典型特性
25℃下的粘度，mPa̶ |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
