ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/ACHESON PM-500電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
PM-500 is designed to dry rapidly to form a flexible, conductivecoating. It is suitable for applications using high speedflexographic printing techniques.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Solids Content, % 82.5 to 84.0
Viscosity, Brookfield - RVT, mPa•s (cP):
Spindle 4, speed 20 rpm, @ 25oC 2,300 to 7,000
Density, kg/l 3,200
Theoretical coverage, m2/kg:
@ 25μm 5.74
Shelf Life @ 5 to 40°C (from date of manufacture),
months6
TYPICAL DRYING PERFORMANCE
Use high velocity hot air and/or infra-red systems for optimumperformance. Temperature settings depend on the substrate in useand process speed therefore drying rates should be determined basedon the temperature constraints of the substrate and production dryingcapability. The relationship between resistivity and drying temperatureis shown in the following graph. All samples were exposed to thetemperature indicated for a period of 1minute.
Storage
Store product in the unopened container in a dry location.Storage information may be indicated on the product containerlabeling.Optimal Storage: 5 to 40 °C
PM-500設計用于快速干燥以形成柔性，導電性涂層。適用于高速應用柔版印刷技術。
固化材料的典型特性
固含量，％82.5〜84.0
粘度，Brookfield - RVT，mPa•s（cP）：
主軸4，轉速20 rpm，@25oC2,300〜7,000
密度，kg / l 3,200
理論覆蓋率，m2/ kg：
@25μm5.74
保質期為5至40°C（自生產日期起）
幾個月6
典型干燥性能使用高速熱空氣和/或紅外系統進行*佳化性能。溫度設 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
