樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/樂泰 3703電子組裝/工業(yè)膠水/電子組裝膠水/工業(yè)用膠
技術服務熱線：021-51693135 / 021-22818476
樂泰 3703 is primarily designed for bonding rigid andflexible PVC to polycarbonate where large gap filling capabilities (0.25mm) and a flexible joint are desired. Itsflexibility enhances the load bearing and shock absorbing characteristics of the bond area.
The product has shownexcellent adhesion to a wide variety of substrates includingglass, many plastics and most metals.
The thixotropic nature of樂泰 3703 reduces the migration of liquid product afterapplication to the substrate.
TYPICAL PROPERTIES OF UNCURED MATERIALSpecific Gravity @ 25 °C 1.12Viscosity, Brookfield - HBT, 25 °C, mPa•s (cP):Spindle TB, speed 10 rpm, Helipath 18,000 to 35,000LMS
Cure rate andultimate depth of cure depend on light intensity, spectraldistribution of the light source, exposure time and light transmittance of the substrate through which the light mustpass.Fixture TimeUV fixture time is defined as the light exposure timerequired to develop a shear strength of 0.1 N/mm2.UV Fixture Time, Glass microscope slides, seconds:6 mW/cm2, measured @ 365 nm ≤10LMSStorageStore product in the unopened container in a dry location.
Storage information may be indicated on the product containerlabeling.
Products shall be maintained at temperaturesbetween 8°C to 28°C unless otherwise labeled, or,specified.
Storage, at temperatures below 8°C, or, greaterthan 28°C, is not recommended.
Temperatures below 8°Cand above 28°C can adversely affect product properties.
樂泰 3703主要設計用于將剛性和柔性PVC粘合到具有大間隙填充的聚碳酸酯中能力（0.25mm）和柔性接頭 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發(fā)布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯(lián)系信息
