樂泰 3129電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
樂泰 3129 is a one part, heat curable epoxy.
This products designed to cure at low temperature and gives excellent adhesion on a wide range of materials in considerably short time.
Typical applications include Memory cards, CCD/Misassembles.
Particularly suited where low curing temperatures are required for heat sensitive components.
TYPICAL PROPERTIES OF UNCURED MATERIAL Specific Gravity @ 25 °C 1.52Viscosity @ 25°C, mPa•s (cP):Hake PK100, Cone PK1, 2°:Shear rate @ 2 s-1 46,000Shear rate @ 20 s-1 12,000Casson Viscosity @ 25 °C, mPa•s (cP):Hake PK100, Cone PK1, 2° 4,200Yield Point, 25 °C, mPa•s 39,000Pot life @ 25 °C, days >21TYPICAL CURING PERFORMANCE Recommended Curing Conditions5 to 10 minutes @ 80 °CNote: With all fast cure systems, the time required for cure depend son the rate of heating.
Conditions where a hot plate or heat sink issued are optimum for fastest cure.
Cure rates depend on the mass of material to be heated and intimate contact with the heat source.
Use suggested cure conditions as general guidelines. Other cure conditions may yield satisfactory results.
TYPICAL PROPERTIES OF CURED MATERIAL Cured for 30 minutes @ 80 °Physical Properties: Coefficient of Thermal Expansion, ISO 11359-2, K-1:alpha 1 47alpha 2 145Glass Transition Temperature, °C:(Tg) via DMA 35Storage Modulus, @ 25°C by DMA GPa 5.4 (psi) (780,000)Storage Store product in the unopened container in a dry location.
Storage information may be indicated on the product container labeling. Optimal Storage: -15 °C to -25 °C.
Storage below minus (-)25 °Cor greater than minus (-)15 °C can adversely affect product properties.
樂泰 3129是熱固化環氧樹脂的一部分。
該產品設計用于在低溫下固化，并在短時間內在各種材料上提供優異的粘合性。
典型應用包括存儲卡，CCD / CMOS組件。特別適用于熱敏組分需要低固化溫度的特性。25℃下的固化材料特殊重力1.52粘度，mPa•s（cP）：Hake PK100，錐形PK1,2°：剪切速率@ 2 s -1 46,000干燥速率@ 20 s-1 12,000卡森粘度@ 25°C，mPa•s（cP） |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
