樂泰 3108電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
樂泰® AA 3108™ is designed primarily for potting and sealing glass to metal joints that must withstand thermal cycling and environmental exposure. The product has shown excellent capabilities in bonding dissimilar rigid substrates.
TYPICAL PROPERTIES OF UNCURED MATERIAL Specific Gravity @ 25 °C 1.08Flash Point - See SDS Viscosity, Brookfield - RVT, 25 °C, mPa•s (cP):Spindle 4, speed 20 rpm, 3,600 to 6,600LMSTYPICAL CURING PERFORMANCE樂泰® AA 3108™ can be cured by exposure to UV light at365 nm.
Surface cure is enhanced by exposure to UV light in the 220 to 260 nm range. Cure rate and ultimate depth of cure depend on light intensity, spectral distribution of the light source, exposure time and light transmittance of the substrate through which the light must pass. Fixture Time Fixture time is defined as the time to develop a shear strength of 0.1 N/mm2.UV Fixture Time, Glass, seconds: Medium Pressure Hg Arc bulb, Zeta®7200 light source:50 mW/cm2, measured @ 365 nm ≤15LMSElectrodeless, D bulb:100 mW/cm2, measured @ 365 nm 7StorageStore product in the unopened container in a dry location.
Storage information may be indicated on the product containerlabeling.
Optimal Storage: 2 °C to 8 °C. Storage below 2 °C or greater than 8 °C can adversely affect product properties.
樂泰®AA 3108™主要用于盆栽和密封玻璃與金屬接頭，必須承受熱循環和環境暴露。該產品在粘合不相似的剛性基材中顯示出優異的性能。
固化材料的特性特性25℃下的特定重力1.08閃點 - 參見SDS
粘度，Brookfield - RVT，25°C，mPa•s（cP）：主軸4，轉速20 rpm，3,600至6,600LMS特殊固化性能AA 3108™可通過暴露于365 nm的紫外線固化。通過暴露在220至260nm范圍內的紫外線來增強表面固化。固化速率和*極深度取決于光強度，光源的光譜分布，光線必須通過的穿透線的曝光時間和透光率。混合時間混合時間定義為開發剪切強度為0.1 N /mm2的時間.UV夾具時間，玻璃，秒：中壓Hg電弧燈泡，Zeta®7200光源：在365nm下測量的50mW / cm 2≤15LMS無電極，D燈泡：100mW / cm 2，在365nm下測量7StorageStore產品在未打開 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
