HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/HYSOL PC40-UM電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線:021-51693135 / 021-22818476
HYSOL®PC40-UM™ is a single component, VOC free conformal coating.
This product is specifically formulated torapidly gel and immobilize when exposed to U.V. light, and then cure when exposed to atmospheric moisture, thus ensuring optimum performance even in shadowed areas.
Thin layer coatings can be gelled, almost instantly, to a depth of 7mils. HYSOL® PC40-UM™ fluoresces intensely with backlight and exhibits excellent adhesion to a variety of metal, ceramic, and glass filled epoxy surfaces fulfilling the needs of the most demanding environmentally friendly applications in today’s PCB marketplace.
TYPICAL PROPERTIES OF UNCURED MATERIAL Typical Properties of Liquid Material Specific Gravity @ 25oC 1.07Nominal Viscosity @ 25oC, cps 500TYPICAL CURING PERFORMANCE Recommended Curing Conditions activated in 30 seconds @ 300 - 600 mW/cm2Moisture cure for shadow areas on a populated board: 2 to 3 days @RT for secondary cure. TYPICAL PROPERTIES OF CURED MATERIAL Physical Properties: Hardness, Shore D 80Continuous Operating Range, oC -40 to 135Electrical Properties: Dielectric Constant @ 25oC :1-MHz 2.75 / 0.012Volume Resistivity, ohm/cm 3.5×1016Surface Resistivity, ohms 3.8×1016 Storage Store product in the unopened container in a dry location. Storage information may be indicated on the product containerlabeling.Storage between 20 and 30oC out of sunlight and unoriginal unopened containers. Refer to packaging specific quote for shelf life information.
HYSOL®PC40-UM™是單組分VOC Free conformal涂料。
該產品具有特異性配方,易于暴露于紫外線下并固化。光,然后暴露于大氣水分時固化,即使在陰影區域也 |
 |
|