HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/HYSOL ES1300電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線:021-51693135 / 021-22818476
HYSOL®ES1300™ is a two-component filled epoxy system designed for vacuum impregnation applications.
It is especially recommended for bobbin wound ignition coil applications.HYSOL®ES1300 was developed to provide crack resistance during thermal stress.
TYPICAL PROPERTIES OF UNCURED MATERIAL Part A Properties Filler Content, % 63Solids Content, % 100Viscosity, Brookfield - RVF, 25 °C, cP:Spindle 7, speed 10 rpm 220,000
Density, @ 25 °C, g/cm3 1.77Part B
Properties Filler Content, % 63Solids Content, % 100Viscosity, Brookfield - RVF, 25 °C, cP:Spindle 5, speed 4 rpm 36,000Density, @ 25 °C, g/cm3 1.76Mixed Properties Viscosity, Brookfield - RVF, 25 °C, cP:Spindle 5, speed 4 rpm 85,000Pot Life, 200gm mass @ 25 °C, hours 8Gel Time @ 100 °C, minutes 50 TYPICAL CURING PERFORMANCE Recommended Curing Conditions3 hours @ 93 °C plus 1 hour @ 130 °C (Recommended cure)3 hours @ 120 °C (Alternate cure)
TYPICAL PROPERTIES OF CURED MATERIAL Physical Properties:Coefficient of Linear Thermal Expansion, ppm/oC:Alpha 1, Below Tag @ 40 to 60 °C 50Alpha 2, Above Tag @ 110 to 130 °C 170Glass Transition Temperature (Tag), °C 81Density, , g/cm3 1.79Storage
Store product in the unopened container in a dry location. Storage information may be indicated on the product containerlabeling.Optimal Storage: 20 °C to 30 °C.
Storage below 20 °C or greater than 30 °C can adversely affect product properties.
HYSOL®ES1300™是一種雙組分填充環氧樹脂系統,用于真空浸漬應用。
特別 |
 |
|