CATALYST 17電子組裝/工業膠水/電子組裝膠水/工業用膠 CATALYST 17電子組裝/工業膠水/電子組裝膠水/工業用膠 CATALYST 17電子組裝/工業膠水/電子組裝膠水/工業用膠 CATALYST 17電子組裝/工業膠水/電子組裝膠水/工業用膠 CATALYST 17電子組裝/工業膠水/電子組裝膠水/工業用膠 CATALYST 17電子組裝/工業膠水/電子組裝膠水/工業用膠 CATALYST 17電子組裝/工業膠水/電子組裝膠水/工業用膠 CATALYST 17電子組裝/工業膠水/電子組裝膠水/工業用膠 CATALYST 17電子組裝/工業膠水/電子組裝膠水/工業用膠 CATALYST 17電子組裝/工業膠水/電子組裝膠水/工業用膠 CATALYST 17電子組裝/工業膠水/電子組裝膠水/工業用膠 CATALYST 17電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
Catalyst 17 epoxy is formulated not to sag or run during cure when applied on loose fitting parts set on
vertical or overhead surfaces. It is designed to perform well nonporous or non-porous surfaces.
ECCOBOND 276 Catalyst 17can be exposed to temperatures as high as 260oC.TYPICAL PROPERTIES OF UNCURED MATERIAL Mixed Properties Shelf Life @ 25 °C (from date of manufacture) months 6Pot Life @ 25 °C, hours 24Flash Point - See MSDSTYPICAL CURING PERFORMANCE Cure Schedule8 hours @ 120°C6 hours @ 150°C3 hours @ 180°C2 hours @ 200°CThe above cure profiles are guideline recommendations.
Cure conditions (time and temperature) may vary based on customers’ experience and their application requirements, as well as customer curing equipment, oven loading and actual oven temperatures.
Storage Store product in the unopened container in a dry location. Storage information may be indicated on the product containerlabeling.
Optimal Storage : 25 °Material removed from containers may be contaminated during use.
Do not return product to the original container.
催化劑17環氧樹脂配制成在固化時不會松動，適用于安裝在松緊配件上的零件垂直或頂部表面。它被設計用于執行良好的多孔或無孔表面。
ECCOBOND 276催化劑17可暴露于高達260oC的溫度。
固化材料的特性混合性能25°C（從制造日期）開始的壽命6Pot壽命@ 25°C，小時24沖擊點 - 參見MSDSTYPICAL CURING PERFORMANCECURE Schedule 8 hours @ 120 °C 1小時@ 150°C3小時@ 180°C2小時@ 200°CT上述固化曲線是指導性建議。
治愈條件（時間和溫度）可能會根據客 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
