HYSOL KL1000-3A電子膠水/塑封膠水/漢高樂泰膠水/塑封方案
技術服務熱線：021-51693135 / 021-22818476
樂泰 HYSOL KL 1000-3A provides the lowest cost ofownership with superior moldability and reliability.樂泰 HYSOL KL 1000-3A meets UL 94 V-0 Flammabilityat 3.175mm thickness.TYPICAL PROPERTIES OF UNCURED MATERIALGel Time @ 175 °C, seconds 23 Spiral Flow, @ 175°C, cm 80Shelf Life:@ 5oC, days 365TYPICAL PROCESS DATAHandling
Preheat Temperature :Conventional mold, °C 80 to 100Automold, seconds 0 to 5Molding Temperature, °C 150 to 195Molding Pressure, Kg/cm2 40 to 100Transfer Time:Conventional mold, seconds 10 to 18Automold, seconds 4 to 10Curing Time, @ 175oC:Conventional mold, seconds 50 to 120Automold, seconds 50 to 80Post Cure @ 175°C, hours 4 to 6樂泰 HYSOL KL 1000-3A has been formulated to provide thebest possible moldability and as wide a molding latitude as possible.
Although molding and curing conditions will vary from situation tosituation, recommended starting ranges are shown above.StorageStore product in the unopened container in a dry location.
Storage information may be indicated on the product containerlabeling.Powder Storage - Powder or preforms should be stored at 5oCor below, in closed containers. After removal from coldstorage, the material MUST be allowed to come to roomtemperature, in the sealed container, to avoid moisturecontamination.
The suggested waiting time for a standard 15kg carton box is 24 hours
樂泰 HYSOL KL 1000-3A提供*低的擁有成本，具有出色的成型性和可靠性.
樂泰 HYSOL KL 1000-3A符合UL 94 V-0 Flammabilityat 3.175mm厚度。
固化材料的特性特性時間@ 175°C秒秒23螺旋流，@ 175°C，cm 80Shelf壽命：@5oC，天365工藝流程數據處理預熱溫度：常規模具，°C 80至100Automold，秒0至5模具溫度，℃150至195壓鑄壓力，Kg /cm240至100轉印時間：常規模具秒10至18Auold，秒4至10℃，@ 175℃：常規模具，秒50至120Automold，秒50至80后固化@ 175°C，小時4至6樂泰 HYSOL KL 1000-3A已配制成盡可能提供可塑性和成型寬度。
盡管成型和固化條件將不同的情況，建議的起始范圍如上所示。
儲存產品在未開封的容器中，在干燥的位置。
儲存信息可能在產品容器標簽上指示。
粉末儲存 - 粉末或預制件應存放在5oC以下，密閉 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
