HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2320電子膠水/塑封膠水/漢高樂泰膠水/塑封方案
技術服務熱線：021-51693135 / 021-22818476
樂泰 HYSOL GR 2320 epoxy molding compound deliversoutstanding performance and ease of use.樂泰 HYSOL GR 2320 meets UL 94 V-0 Flammability at6.35mm thickness.
TYPICAL PROPERTIES OF UNCURED MATERIALGel Time @ 175 °C, seconds 14Spiral Flow, @ 175°C, cm 76.2Shelf Life:@ 5oC, days 365TYPICAL PROCESS DATAHandlingPreheat Temperature , °C 80 to 95Molding Temperature, °C 140 to 180Transfer Pressure, Kgf/cm2 40 to 85Transfer Time, seconds 6 to 15Curing Time, 3 mm section:Conventional mold:
@ 175oC, seconds 70 to 90Automold:@ 175oC, seconds 50 to 70Post Cure @ 175°C, hours 2 to 6樂泰 HYSOL GR 2320 has been formulated to provide the bestpossible moldability and as wide a molding latitude as possible.Although molding and curing conditions will vary from situation tosituation, recommended starting ranges are shown above.StorageStore product in the unopened container in a dry location.Storage information may be indicated on the product containerlabeling.Powder Storage - Powder or preforms should be stored at 5oCor below, in closed containers. After removal from cold
storage, the material MUST be allowed to come to roomtemperature, in the sealed container, to avoid moisturecontamination.
The suggested waiting time for a standard 15kg carton box is 24 hours.
樂泰 HYSOL GR 232 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
