漢高漢高樂泰樂泰 MS 930
技術服務熱線：021-51693135 / 021-22818476
樂泰® MS 930™ is a low modulus, flexible adhesive used for elastic sealing on various substrates. It is a one component sealant based on a modified silane polymer, which cures by reaction with moisture to a soft elastomeric thermoset product. The skin formation and curing times are dependent on humidity, temperature, and joint depth. By increasing the exposure to moisture these times can be reduced.
樂泰® MS 930™ is non-corrosive and free of solvents, isocyanates, silicones, PVC, and is odorless. It demonstrates good adhesion to a wide variety of substrates and is compatible with suitable paint systems. The sealant also demonstrates good UV resistance and can therefore be used for interior and exterior applications.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Density, ISO 2811-1 @ 22 °C, g/ml 1.44 to 1.5LMS
Flash Point - See MSDS
TYPICAL CURING PERFORMANCE
Under normal conditions, the atmospheric moisture initiates the curing process. The product develops functional strength in 24 hours and fully cures in 7 days.
Skin Over Time
Skin over time is the time the surface of the adhesive forms a skin upon exposure to atmospheric moisture at 25 ± 2 °C, 50 ± 5% RH. Skin Over Time, minutes 10 to 40LMS
樂泰®MS 930™是低模量，用于各種基材的密封軟粘彈性。它是基于改性硅烷聚合物一一組分密封膠，其治療反應與水分軟橡膠熱固性產品。皮膚的形成和固化時間取決于濕度，溫度和關節深度。通過增加水分暴露，這些時間可以減少。
樂泰®MS 930™無腐蝕性、無溶劑、異氰酸酯、有機硅、PVC、和無味。它表現出良好的附著力，以各種各樣的基板，并與合適的油漆系統兼容。該密封劑還表現出良好的抗紫外線性能，因此可用于內部和外部應用。
固化材料的典型性能
密度、ISO 2811-1 @ 22°C，g／ml 1.44 1.5lms
閃光點看到MSDS
典型的固化性能
在正常情況下，大氣濕度開始固化過程。產品在24小時內發揮功能強度，并在7天內完全治愈。
皮膚上
隨著時間的推移，皮膚表面暴露于大氣濕度為25°C 2°C，50°C時，皮膚表面形成時間。皮膚上，10分鐘40l |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
