漢高漢高樂泰樂泰 貼片紅膠Chipbond 3619
技術服務熱線：021-51693135 / 021-22818476
樂泰 3619
3619™ is designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. Particularly suited where low curing temperatures are required with heat sensitive components, and in applications where short curing times are required.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.22
Yield Point, 25 °C, Pa
Cone & Plate Rheometer:
Haake PK 100, M10/PK 1 2° Cone
200 to 450LMS
Casson Viscosity @ 25 °C, Pa∙s
Cone & Plate Rheometer:
Haake PK 100, M10/PK 1 2° Cone
1 to 4
Particle Size, μm <100
Flash Point - See MSDS
VISCOSITY VS. TEMPERATURE
The following graph shows a typical temperature-viscosity curve as measured using a Haake rotoviscometer PK100, M10/PK1 2° Cone system at a shear rate of 2 s -1 which is representative of the shear rate in the dispense nozzle. Increased cabin or nozzle temperature in the 30°C to 35°C range may aid dispense performance at higher dispense speeds.
TYPICAL PROPERTIES OF CURED MATERIAL
Cured for 30 minutes @ 100 °C
Physical Properties:
Coefficient of Thermal Expansion,
ISO 11359-2, K
-1:
Temperature Range: -30 °C to +30 °C 60
Temperature Range: 70 °C to 150 °C 120
Density, BS 5350-B1 @ 25 °C, g/cm3 1.3
Glass Transition Temperature, ASTM D 4065, °C 50
Electrical Properties:
Volume Resistivity, IEC 60093, Ω·cm 1.2×1015
Surface Resistivity, IEC 60093, Ω 19×1015
Electrolytic Corrosion, DIN 53489 A - 1
Dielectric Breakdown Strength,
IEC 60243-1, kV/mm
30
Dielectric Constant / Dissipation Factor, IEC 60250:
1-kHz 3.24 / 0.02
100-kHz 3.05 / 0.03
1,000-kHz 2.89 / 0.04
10,000-kHz 2.75 / 0.05
Surface Insulation Resistance, Ω:
IPC TM 650 2.6.3.1:
Test Board: IPC-B-25A, comb pattern D:
Initial 200×109
Aged for 7 days @ 50 °C, 90 % RH 550×10
樂泰3619
3619™是專為表面粘接安裝設備的印刷電路板波峰焊 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
