噴粉涂裝的組織生產
The production of powder spraying coating
對于小批量工件，一般采取手動噴粉裝置，而對于大批量工件，一般采用手動或自動噴粉裝置。無論是手動噴粉或自動噴粉，把住質量關是非常重要的。要確保被噴工件著粉均勻、厚度一致，防止薄噴、漏噴、擦落等缺陷。
For small batch of workpieces, generally adopts the manual powder spraying device and theworkpiece in large quantities, generally use the manual or automatic spraying device. Either a manual or automatic spray spray, control quality is very important. To ensure that the workpiece is sprayed with uniform powder, uniform thickness, to prevent the thin spray, spray, wipe off and other defects.
在涂裝生產線這一工序，還應注意工件之掛鉤部分，在進入固化之前，應盡可能將附著其上的粉末吹掉.
In the process of painting production line, should also pay attention to parts of the hook part, prior to curing, it should be possible to be attached on the powder blown off.
防止掛鉤上之多余粉末固化，有的對固化前去掉余粉確有困難時，應及時剝離掛鉤上已固化之粉膜，從而確保掛鉤導電良好，以利下批工件易于著粉。
To prevent the hook on the excess powder curing, and some of the prior to the removal of residual powder is indeed difficult, should be promptly removed from the hook has been cured powder film, so as to ensure good conductivity hook, in order to facilitate the work of the next batch of powder.
章丘市同盛涂裝設備廠(13361064673)，位于濟南市東郊的章丘市辛寨鎮駐地。公司企業法人侯祥平自1990年起從業在涂裝行業。曾在華譽、金城、華豐、興盛等多家烤漆設備廠，生產、安裝、設計、銷售和建廠。由此積累了專業經驗和好多技術過硬的朋友。
章丘市同盛涂裝設備廠
聯系人：侯經理
電話：0531-83543283
傳真：0531-83543283
手機：15165419777*13361064673
商務QQ：731315162
E-mail：dongshenzi@163.com
地址：山東省章丘市辛寨駐地
諾商基于多年的優化經驗和品牌基礎推出的諾商商道系統，諾商信息您身邊的互聯網專家！ |
 |
|
手機站
您當前位置是：產品大全 >> 機械及行業設備 >>
其他行業設備
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息