機型介紹 Product Introduction
廣告字激光焊接機應用高能脈沖激光對金屬字進行焊接，機器本身采用德國技術，整體外觀美觀，配備高性能承重工作平臺，手柄式操作簡單，性價比較高 。
采用英國摩根進口激光器，壽命8－10年，性能穩定，功率大，氙燈出光次數800萬次以上。
光路可上下前后移動，激光頭可360度旋轉，采用加長光路，適合3米以內字體焊接。
參數智能調節，不同材質選用不同波型，簡單快捷。
可24小時連續操作。
- Advertising laser laser welding machine adopts high energy pulse for welding metal words,it adopts German technology, beautiful,appearance equipped with high-performance bearing working platform, the operation of handle type is very simple , high price ratio.
- Imported laser source from Morgan from UK, 8-10 years lifetime, stable performance, high power, Xeon Lamp emits beam for 8 more than million times,
- Laser path can be moved up and down, forwards and backwards, Laser head rotates 360 degree. Equipped with lengthened laser path, suitable for welding within 3 meters long Character .
- Intelligent adjustment of parameters, different wave suitable for different material with, simple and quick.
-24 hours continuous operation
特 點 Features
速度快，是傳統焊接的5倍；
成本低，不需要任何焊材；
焊接效果好，焊接牢固，不會出現脫焊，并且沒有焊斑；
熱影響區域小，不會引起因受熱而變形的現象；
適用性廣，可焊接0.2mm-1.0mm厚的材料，可焊接3cm-120cm大小的字體；
性價比高，省人工及焊材，并且耗材是傳統焊接的1/10不到。
-Fast speed, 5 times faster than traditional welding process.
-The cost is low, no need any welding materials;
- Good, strong welding effect , welding, No take-off welding, no black welding.
- Less Heat affected area,, no deformation caused by welding process heat
- Applicability is wide, can weld 0.2 mm to 1.0 mm thick welding materials, and also welds 3 cm - 120 cm font
- Cost-saving, save labor and welding materials, and consumable cost is less than 1/10 of traditional welding method.
行業應用和適用材料 Applicable industry and material
適用于各種廣告行業，小型焊接加工行業。廣泛應用于焊接各種不銹鋼鏡面字、不銹鋼拉絲字、不銹鋼球面字、不銹鋼平面字 |
 |
|
手機站
您當前位置是：產品大全 >> 機械及行業設備 >>
焊接、切割設備與材料
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息
