廠家直銷-模具激光焊接機GS-200m
機型介紹 Product Introdution
該機型主要針對于模具行業設計，用于精密模具的修補。
采用新型大能量激光電源、激光器、大流量水機；
焊接能量高，相比一般焊機可熔更粗焊絲，焊接性能穩定；
單個激光脈沖，波形可任意調節，滿足復雜、特殊材料的焊接工藝要求；
能耗低，長期使用可為用戶節省大量開支。
- The model is mainly designed for the mold industry for precision molds repair.
- Using the new high energy laser power, laser source, high flow water machine;
- High welding energy , compared to the general welding machine, thicker fusible wire,
welding stable performance;
- Single laser pulse, waveform can be adjusted to meet the complex requirements of
special materials, welding technology;
特 點 Features
觸摸屏界面，操作簡單方便，體積小巧便攜。
焊縫牢固美觀，熱影響區小，焊縫平整無氣孔，焊縫強度、韌性高。
進行微小零件的精密焊接、各種不同工件的點焊和模具補焊等。
Touch-screen interface, easy operation, compact and portable.
Welding points strong and beautiful, small heat-affected zone, the weld smooth and no holes, weld strength, high toughness.
Minor parts of precision welding, spot welding and a variety of different parts of the mould repair welding etc.
行業應用和適用材料 Applicable industry and material
適用于精密注塑、壓鑄、模具焊接加工等行業，廣泛應用于鑄件、機加件等沙孔、崩缺、過切加工等的修補，各類冷作高合金鋼、熱鍛高合金鋼、含鎳工具鋼、高級鋼、銅合金、鈹銅、高韌鋁合金等金屬材料的焊接。
Suitable for precision injection molding, casting, welding mold processing and other industries; widely used in sand hole castings, machine parts and so on, collapsing missing,, all kinds of cold alloy steel, high alloy steel forging, including Nickel welding tool steel, high-grade steel, copper alloys, beryllium copper, high-toughness aluminum and other metal material.
技術參數表 Technical Parameter
型號MOdel NO. GS-200M GS-180M
*大激光功率Max. Laser power 200W（optional） 180W（optional）
激光波長Laser wavelength 1064mm 1064mm
*大脈沖能量Max pulse energy 70J 60J
焊接頻率Frequency 0.1-100Hz 0.1 |
 |
|
手機站
您當前位置是：產品大全 >> 機械及行業設備 >>
焊接、切割設備與材料
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息
