格仕達-FOL10-光纖激光打標機
FOL-10/FOL-20光纖激光打標機 Fiber Laser Marking Machine
型 號 Model FOL-10/20
功 率 Power 10W/20W
激光波長 Wavelength 1064nm
光束質量 Beam quality M2<1.5
激光輸出功率 Output power 10%~100%連續可調 (continuously to be adjusted)
激光輸出頻率 Output frequency 20KHz~100KHz連續可調 (continuously to be adjusted)
功率穩定性 (8h) Power stability(8h) < ± 1 %rms
聚焦光點直徑 Focus spot diameter <0.01 mm
選配范圍 Matching size 50X50mm 110mmX110mm 175mmX175mm
標刻深度 Carving depth 1.2mm
標刻速度 Carving speed 800 standard characters/second
*小線寬 Minimum line width 0.012mm
*小字符 Minimum character 0.15mm
重復精度 Repeated accuracy ± 0.003mm
系統運行環境 System operation
GnvironmG 門 t WindowsXP/2000/98
冷卻方式 Cooling mode 風冷 Air cooling
運行環境溫度 Temperature of operation environment 15七〜35七
電力需求 Power requirement 220V/single phase/50Hz/<400W
激光模塊壽命 Life of laser module 100000 Hrs
機型特點 Product Features
全風冷光纖激光機是現代激光領域的*前沿、響應全球工業產業化、節能和環保的科技產品。這項創新使激光的光轉換效率達到了 38%-50%，所有系統的激光源只有500w,并且不需要水冷系統，采用風冷即可滿足系統需要，從而使系統大大簡化。該激光 器體積較小，全風冷，纖維輸出，安裝操作簡易方便，獨有的后臺反饋隔離器裝置可以有效阻止加工對象反射過來的光束，從而避 免了激光光束再次進入激光發生器而使激光發生器受到損壞。
Glory laser develops and produces complete air cooling Fiber Optical Laser marking system in China. It is environmental friendly, low consumption, fully automatically and leading laser system. This creative laser system makes the optical conversion rate up to 38%-50%. The air cooling can meet the system requirements. This laser system is small and compact size. Fiber output, can flexibly makes 3D processing system. The backward reflecting isolator, which uses the particularity of wavelength and direction of laser, and the special structure inside the backward reflecting isolator can block the laser reflected by work piece to avoid the laser entering the laser oscillator again to damage the laser oscillator.
行業應用 |
 |
|
手機站
您當前位置是：產品大全 >> 機械及行業設備 >>
焊接、切割設備與材料
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息
