機器特點： Features:
■用途廣:適用于絞合線,并行線雙層/單層連續中心繞包包帶 Used abroad :Uesd in twist pair,double layer /single continously center taping.
■產能高:高轉速,生產效率是傳統包帶機的2.5倍High output :High speed running,work rate is 2.5 times than traditional.
■張力穩:包帶張力自動演算追蹤,從滿盤到空盤保持恒張力,不須人工調整 Tension is steady:/Automatic tension trace instrument,taping tension keep constant from start to end.
■包距準:觸摸屏設定重疊率,PLC控制,加減速及正常工作時包帶形成點穩定不動ccurate
■扁平電纜好:收線排位采用軸排式結構，排幅排距任意設定 Good traversing:Take-up traversing used in shif traversing,
■品質高:制作HDMI,DP,ATA ,SATA ,SAS等高頻線材,合格率100% High quality:Product the HDMI DP and so on ,rate of pass100%
機器型號 HPM500數控式雙層/單層立式包帶機
Type HPM500Numerical control type double layer/Single
機器用途 適用于絞合線,并行線雙層/單層連續中心繞包包帶
Purpose It's used to twisted wire,parallel wire double layer /single layer continuously center wrapping .
芯線規格 AWG32~AWG20
Core specification
包帶材料 鋁箔帶,麥拉帶,棉紙帶,透明帶,云母帶,鐵氟龍帶
Taping materail Aluminum foil tape ,cotton paper tape,transparent tape,mica tape ,teflon tape.
機器轉速 MAX2000rpm / MAX28m/min
Max
機器動力 1HP馬達配變頻調速,包帶盤與引取馬達聯動
Power Adjust the speed by 1HP motor drievers,taping drum and directs motor linkage
包帶張力 包帶張力自動演算追蹤,從滿盤到空盤保持恒張力,不須人工調整
Taping tension Taping tension keep constant from start to end.
收線張力 收線張力從滿盤到空盤保持恒定,不須人工調整
Take-up tension Take-up tension keep constant from start to end.
扁平電纜方式 軸排式收線,線材排位過程中無推/拉力損傷,排幅排距根據線材規格任意設定
Traversing style
放線型式 直線滑軌+滑塊重錘張力式動力放線,配變頻調速,設斷線保護功能
Pay-off type Linear Guidways+Slide weight hommer type/ Mechanical lever+Slide moveing,with the tension test
整機尺寸 4150 X 1400 X 1900 |
 |
|
手機站
您當前位置是：產品大全 >> 儀器儀表 >>
其他未分類
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
聯系信息