樂泰 454平板電腦/筆記本ipad專用膠水，樂泰膠水
技術服務熱線：021-51693135 / 021-22818476
樂泰® 454™ is designed for the assembly of difficultto-bond materials which require uniform stress distribution and strong tension and/or shear strength. The product provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. 樂泰® 454™ is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric. The gel consistency prevents adhesive flow even on vertical surfaces. TYPICAL PROPERTIES OF UNCURED MATERIAL Specific Gravity @ 25 °C 1.1 Flash Point - See MSDS Casson Viscosity, 25 °C, mPa•s (cP): Cone and plate rheometer 100 to 300LMS Viscosity, Brookfield - RVT, 25 °C, mPa•s (cP): Spindle TC, speed 2.5 rpm, Helipath 100,000 to 300,000 Spindle TC, speed 20 rpm, Helipath 18,000 to 40,000 TYPICAL CURING PERFORMANCE Under normal conditions, the atmospheric moisture initiates the curing process. Although full functional strength is developed in a relatively short time, curing continues for at least 24 hours before full chemical/solvent resistance is developed. Cure Speed vs. Substrate The rate of cure will depend on the substrate used. The table below shows the fixture time achieved on different materials at 22 °C / 50 % relative humidity. This is defined as the time to develop a shear strength of 0.1 N/mm2. Fixture Time, seconds: Steel 60 to 210 Aluminum 3 to 10 Zinc dichromate 5 to 20 Neoprene 15 to 20 Rubber, nitrile 5 to 15 ABS 3 to 10 PVC 5 to 10 Polycarbonate 5 to 10 Phenolic 5 to 30 Wood (balsa)
樂泰®454™設計用于組裝困難粘合材料，需要均勻的應力分布和強烈的張力和/或剪切強度。該產品可以快速粘合各種材料，包括金屬，塑料和彈性體。 樂泰®454™特別適用于粘合多孔或吸收材料如木材，紙張，皮革和織物。凝膠一致性即使在垂直表面上也能防止粘合劑流動。固化材料的典型特性25°C時的比重1.1閃點 - 參見MSDS卡森粘度，25°C，mPa•s（cP）：錐形和板式流變儀100至300LMS粘度，Brookfield-RVT，25°C，mPa• s（cP）：主軸TC，轉速2.5 rpm，Helipath 100,000至300,000主軸TC，轉速20 rpm， |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。